Operating Instructions

30
*Note: “(F:)” is an example drive letter – your “My Computer" window may differ
3. To transfer normal MP3 and WMA music files to the Digital Music Player, the MTP (see Music
Transfer Protocol) mode in the Settings menu must be set to “USB.” You can transfer music and
data files to the Digital Music Player by simply dragging them onto the MP650‟s “Removable Disk”
drive letter.
4. While files are being transferred to the Digital Music Player, the screen will display a “WRITE”
message. After files have been successfully transferred, the “READY” message will be displayed
again.
5. If you choose to transfer files or folders to the computer, the Digital Music Player will display a
“READ” message indicating that files are being transferred to the computer. After files have been
successfully transferred, the “READY” message will be displayed again.
NEVER unplug the Digital Music Player during file transfer. Unplug the Digital Music Player
only when Windows informs it is safe (see Disconnecting from a Computer) and the “READY”
screen disappears.
Disconnecting from a Computer
Always follow the procedures listed below before you disconnect the Digital Music Player.
Removing the MP650 in Windows
®
Me, 2000, XP and Vista
1. Select the Hardware icon in the system tray.
2. The Safely Remove Hardware pop-up window will appear. Select it to continue.
Figure 7. Safely Remove Hardware
3. A message window will appear stating: “The „USB Mass Storage Device‟ device can now be safely
removed from the system.”
Figure 8. Safe to Remove Hardware
4. Unplug the Digital Music Player from your computer.