Specifications

ManualsBrandsTranscend Manualscomputers & electronicsIDE SSD

2.5” Solid State Disk

Transcend Information Inc.

V1.00

Description

Due to smaller size (fit the standard dimensions of

2.5” IDE Hard Disk Drives), huge capacity, high

speed, and low power consumption, Solid State Disk

is perfect replacement storage device for PCs,

Laptops, gaming systems, and handheld devices.

Placement

Features

•

RoHS compliant

• Fully compatible with devices and OS that support the

IDE standard (44-Pin, pitch = 2.00 mm)

•

Non-volatile Flash Memory for outstanding data

retention

• Built-in ECC (Error Correction Code) functionality and

wear-leveling algorithm ensures highly reliable of data

transfer

• Supports up to Ultra DMA Mode 6

• Shock resistance

Dimensions

Side Millimeters Inches

100.30

0.40 3.949

0.016

69.85 ± 0.20 2.750 ± 0.008

7.40

0.15 0.292

0.004

Summary of content (35 pages)

PAGE 1
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Description Features Due to smaller size (fit the standard dimensions of • RoHS compliant 2.5” IDE Hard Disk Drives), huge capacity, high • Fully compatible with devices and OS that support the IDE standard (44-Pin, pitch = 2.
PAGE 2
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Specifications Physical Specification Form Factor 2.5-inch HDD Storage Capacities 32 GB to 128 GB Dimensions (mm) Length 100.3 0 ± 0.40 Width 69.85 ± 0.20 Height 7.40 ± 0.15 Input Voltage 5V ± 10% Weight 55g ± 5g Connector 44-Pin standard IDE/ATA connector (Pitch 2.
PAGE 3
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Performance Model P/N Sequential Read(Max.) Sequential Write(Max.) TS32GSSD25-M 80 MB/s 30 MB/s TS64GSSD25-M 80 MB/s 30 MB/s TS128GSSD25-M 80 MB/s 30 MB/s * Note : 25 ℃, according to 44 pin to 40 pin IDE transferring cable test on GIGABYTE GA-965P-DS3, 1GB RAM, IDE interface support UDMA, Windows® XP Version 2002 SP2, benchmark utility HDBENCH (version 3.
PAGE 4
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Package Dimensions Below figure illustrates the Transcend 2.5” Solid State Disk. All dimensions are in mm. *Note: Tighten mounting screws with no more than 1.0Kg-cm (0.07ft-lbs) of torque. Transcend Information Inc. 4 V1.
PAGE 5
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Pin Assignments Pin No. Pin Name Pin No.
PAGE 6
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Block Diagram IDE Connector IDE CTL Flash Transcend Information Inc. Flash Flash Flash 6 V1.
PAGE 7
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Reliability Wear-Leveling algorithm The controller supports static/dynamic wear leveling. When the host writes data, the controller will find and use the block with the lowest erase count among the free blocks. This is known as dynamic wear leveling.
PAGE 8
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.
PAGE 9
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk General Feature Set FLUSH CACHE (E7h) This command is used by the host to request the device to flush the write cache. If there is data in the write cache, that data shall be written to the media. The BSY bit shall remain set to one until all data has been successfully written or an error occurs. IDENTIFY DEVICE (ECh) This commands read out 512Bytes of drive parameter information.
PAGE 10
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M Word Address 62 Default value 0x0000 2.
PAGE 11
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M Word Address Default value 2.
PAGE 12
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk WRITE DMA (CAh) Write data to sectors during Ultra DMA and Multiword DMA transfer. Use the SET FEATURES command to specify the mode value. WRITE MULTIPLE (C5h) This command is similar to the Write Sectors command. Interrupts are not presented on each sector, but on the transfer of a block which contains the number of sectors defined by Set Multiple command.
PAGE 13
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Security Mode Feature Set SECURITY SET PASSWORD (F1h) This command set user password or master password. The host outputs sector data with PIO data-out protocol to indicate the information defined in the following table.
PAGE 14
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk SECURITY ERASE PREPARE (F3h) This command shall be issued immediately before the Security Erase Unit command to enable erasing and unlocking. This command prevents accidental loss of data on the drive. SECURITY ERASE UNIT (F4h) The host uses this command to transfer 512 bytes of data, as shown in the following table, to the drive.
PAGE 15
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk SMART DISABLE OPERATIONS B0h with a Feature register value of D9h.Disables the SMART function. Upon receiving the command, the drive disables all SMART operations. This setting is maintained when the power is turned off and then back on. Once this command has been received, all SMART commands other than SMART ENABLE OPERATIONS are aborted with the Aborted Command error.
PAGE 16
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M Byte 0-1 2 - 114 115-116 117-361 362 363 364 - 365 366 367 368 - 369 F/V X X V X V X V X F F 370 F 371 372 373 374 375 - 385 386 - 395 X F F F R F 396 - 397 F 398 - 399 V 400 - 406 407 - 415 416 417 418 – 419 420 421 – 423 424 – 425 426 – 428 429 – 431 432 – 445 446 – 510 511 F X F F V F V V V V F X V 2.
PAGE 17
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Host Protected Area Feature Set A reserved area for data storage outside the normal operating system file system is required for several specialized applications. Systems may wish to store configuration data or save memory to the device in a location that the operating systems cannot change.
PAGE 18
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.
PAGE 19
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.
PAGE 20
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Initiating an Ultra DMA data-in burst Transcend Information Inc. 20 V1.
PAGE 21
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Sustained Ultra DMA data-in burst Host pausing an Ultra DMA data-in burst Transcend Information Inc. 21 V1.
PAGE 22
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Device terminating an Ultra DMA data-in burst Transcend Information Inc. 22 V1.
PAGE 23
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Host terminating an Ultra DMA data-in burst Transcend Information Inc. 23 V1.
PAGE 24
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Initiating an Ultra DMA data-out burst Transcend Information Inc. 24 V1.
PAGE 25
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Sustained Ultra DMA data-out burst Device pausing an Ultra DMA data-out burst Transcend Information Inc. 25 V1.
PAGE 26
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Host terminating an Ultra DMA data-out burst Transcend Information Inc. 26 V1.
PAGE 27
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Device terminating an Ultra DMA data-out burst Transcend Information Inc. 27 V1.
PAGE 28
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Multiword DMA data transfer For Multiword DMA modes 1 and above, the minimum value of t0 is specified by word 65 in the IDENTIFY DEVICE parameter list. Table 50 defines the minimum value that shall be placed in word 65. Devices shall power-up with mode 0 as the default Multiword DMA mode. Table − Multiword DMA data transfer Transcend Information Inc. 28 V1.
PAGE 29
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Initiating a Multiword DMA data burst Transcend Information Inc. 29 V1.
PAGE 30
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Sustaining a Multiword DMA data burst Transcend Information Inc. 30 V1.
PAGE 31
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Device terminating a Multiword DMA data burst Transcend Information Inc. 31 V1.
PAGE 32
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Host terminating a Multiword DMA data burst Transcend Information Inc. 32 V1.
PAGE 33
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.
PAGE 34
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk PIO data transfer to/from device Transcend Information Inc. 34 V1.
PAGE 35
TTS S3322G GS SS SD D2255--M M TTS S6644G GS SS SD D2255--M M TTS S112288G GS SS SD D2255--M M 2.5” Solid State Disk Ordering Information The above technical information is based on industry standard data and has been tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice.