User‟s Manual Dashcam DrivePro™ 250 2020/12 (Version 1.
Table of Contents 1. 2. 3. Package Contents .......................................................................... 3 System Requirements ................................................................... 3 Getting Started ............................................................................... 4 3-1 Overview ...........................................................................................................................4 3-2 Inserting a microSD Memory Card ............................
19. Eurasian Conformity Mark (EAC) ...............................................
1. Package Contents The DrivePro dashcam package includes the following items: DrivePro Dashcam microSD Memory Card Suction Mount Car Lighter Adapter Quick Start Guide 2. System Requirements System requirements for connecting the DrivePro to a computer and for using the DrivePro Toolbox: A desktop or a laptop with a working USB port Windows® 7 Windows® 8 Windows® 8.1 Windows® 10 macOS 10.
3. Getting Started 3-1 Overview USB Connector Bracket Socket GPS Receiver Microphone Memory Card Socket Emergency Button Reset Button LED Indicator Function Buttons 2.4” LCD Display Speaker Lens 3-2 Inserting a microSD Memory Card You must insert a microSD memory card into the DrivePro before you can start recording. Please use a microSD memory card with 8GB, 16GB, 32GB, 64GB or 128GB capacity (Class 10 or above). 1.
2. To remove, push to eject the memory card out of the slot. WARNING: Do not remove the memory card during a shutdown to avoid damages to the memory card and loss of recorded videos The following table shows approximate recording time according to capacity and resolution (for reference only): Card Capacity Frame Rate 32GB 64GB 128GB Full HD 1080P 60 fps 2.5 hr 5 hr 10.5 hr Full HD 1080P 30 fps 3 .5hr 7 hr 14 hr HD 720P 60fps 5 hr 10 hr 20 .5hr HD 720P 30fps 7 hr 13 .5hr 28.
2. Thoroughly clean and dry the area of the windshield you wish to mount the DrivePro. If possible, mount the DrivePro in the middle of the windshield near the rear-view mirror for the best field of view. 3. Peel off the protective film from the mount bracket’s foam sticker, and firmly attach the DrivePro to the windshield. 4. Turn the adjustment knob anticlockwise to loosen, and then adjust the DrivePro’s position. 5.
2. Connect the other end of the car charger to your car power outlet. 3. After the car engine is switched on, the DrivePro will automatically turn on and start recording. 4. After the car engine is switched off, the DrivePro will automatically save the current recording, and power it off. Note: Car power outlets of some types of vehicles will still supply power after the car engine is turned off.
3-5 Function Buttons Mode Video Recording Power/Wi-Fi Browse Files Settings Take Photos Back Up Down OK Browse/Settings / Video Playback Back Play/Pause Protected/Unprotected Delete Back Up Down Delete View Photos 1. Press and hold the button for 3 seconds to manually turn on/off the DrivePro in any mode. 2. Long press the button to quickly turn on/off the microphone 3. Long press the button to quickly enter the Time-Lapse Video menu.
3-7 Setting the Date and Time To set the current date and time: . 1. During video recording, press the Settings button 2. Use / to select Date/Time Settings, and press . 3. Use / to adjust values, and press to move to the next block. 4. Repeat step 3 above until the date and time settings are complete. 3-8 Setting UTC Timezone To ensure the accuracy of GPS data: 1. During video recording, press the Settings button 2. Use 3. Use / to select UTC, and press / to adjust values, and press 9 . . .
4. Recording Videos 4-1 Recording Screen 1. Recording status indicator 2. Video length 3. Video resolution and frame rate 4. Wi-Fi connection indicator 5. GPS connection indicator 6. Voice record status 7. Battery status 8. Date/Time After the car engine is switched on, the DrivePro will automatically turn on and start recording. By default, one video file is saved for every 1 minute of recording. To adjust the recording length, please refer to the Settings section in this manual.
30% of the storage space will be saved for emergency video files. Video files recorded in emergency mode are protected from being overwritten. Manual Emergency Recording: During video recording, press the emergency button on the left-hand side of the DrivePro to manually activate emergency recording mode. The emergency icon will appear on the screen when activated.
During Parking mode, the LCD display will turn off; the LED indicator will be solid red on standby. When a motion or collision of the vehicle is detected, the DrivePro will record footage of about 15 seconds; the display will turn on and the LED will flash red. The display will turn off again if no more motion/collision is detected in about 15 seconds. The DrivePro will resume Normal Recording mode when the engine is switched on again (connected to power).
5. Browsing Photos and Playing Videos 5-1 Playing Videos / Browsing Photos 1. During video recording, press the Browse button . 2. Use / to select either Normal, Emergency or Snapshot, and press 3. Use / to select the desired video file, and press 4. Press to pause playback. Press 5. Press to return to the video file list. . again to resume playback. 13 .
5-2 Deleting Videos 1. During playback of a video file, press 2. Use / . The message, “Delete?” will pop up. to select “Yes,” and press to delete the file. 5-3 Protecting Videos 1. During playback of a normal video file, press 2. Use / to select “Yes,” and press 14 . The message, “Lock?”, will pop up. to protect the file.
6. Settings In the Settings menu, you can adjust settings of video resolution, recording time and G-Sensor sensitivity. You can also set the date/time/time zone, change the interface language, format the memory card, and upgrade firmware. 1. During video recording, press the Settings button 2. Use / 3. Use / 4. Press . to select the desired menu option, and press to select the desired setting, and press to return to the Settings menu. 15 . .
6-1 Menu Options Camera Icon Feature Function/Option Set the resolution/quality for video recording. Resolution Exposure Value 1080P 60fps(FHD) (default) / 1080P 30fps(FHD) / 720P 60fps(HD) / 720P 30 fps(HD) Adjust exposure composition value to lighten or darken the preview screen. +2.0 / +1.5 / +1.0 / +0.5 / 0 (default) / -0.5 / -1.0 / -1.5 / -2.0 Turn on/off the microphone during video recording. Microphone Disable / Enable (default) Set the recording length of each recorded video file.
Driving Assistant Icon Feature Function/Option Alert the driver when the vehicle veers out of a lane. This function Lane Departure Forward Collision is activated when the driving speed exceeds the value set ahead. Disable (default) / 60 km/h ~ 150 km/h (40 mph~85 mph) Alert the driver when the vehicle is getting too close to the car ahead. This function is activated when the driving speed exceeds the value set ahead.
Adjust the sensitivity of the G-Sensor. G-Sensor Disable / Low (default) / Medium / High Delay Power Off Auto Display Off Schedule the DrivePro to shut down at a certain time. Disable / 10 secs (default) / 30 secs Set duration for the display to automatically turn off after the recording begins. Note: Auto Display Off is disabled when Speed Alarm, Forward Collision, Lane Departure, Headlight Reminder, Driver Fatigue Alert, or Head-Up Display is enabled.
Information Display the DrivePro’s current firmware version, card capacity, Wi-Fi SSID, password, and model name/number. 6-2 Firmware Upgrade 1. After downloading the firmware from Transcend website, decompress it and put it in the “SYSTEM” folder in the microSD memory card. 2. Insert the microSD memory card that contains the latest firmware version. 3. Select Upgrade Firmware from the Settings menu, and press to start the firmware detection process.
7-1 Downloading and Installing the App 1. Search “DrivePro” on your App Store or Google Play. 2. Download and install the DrivePro App. Once the installation is complete, the App will be displayed on the home screen of your device. Before using the App, please refer to the DrivePro instructions. 7-2 Connecting to the DrivePro 1. Tap Settings > Wi-Fi from your mobile device. 2. Select the Wi-Fi network with DrivePro250 in the SSID. (default password is 12345678) 3.
1. 2. Download the installation files from https://www.transcend-info.com/downloads Install DrivePro Toolbox software on your computer. The useful features include: 1. Video Sorting Easily sort videos by filename, recording date or group. 2. Smooth Video Playback Connect the DrivePro or use a microSD card slot supported card reader or adapter to play back recorded video events on your computer. 3. Edit and Trim Videos Select a video, trim it and save it as a new clip immediately.
The DrivePro will display the following screen when connected to a computer: Windows 7, 8, 8.1 and 10 No drivers are required for connecting the DrivePro to your desktop or laptop. Windows ® Operating Systems have built-in drivers to support your DrivePro. Upon successful connection to your computer, a new Removable Disk drive with a newly assigned drive letter representing the DrivePro icon will appear in the will automatically appear in My Computer, and a Removable Hardware Windows System Tray.
No drivers are required. Plug your DrivePro into an available USB port directly, and your computer will automatically detect it. Proper removal of your DrivePro from macOS: Drag-and-drop the Disk icon corresponding to your DrivePro into the trashcan, and then unplug your DrivePro from the USB port. 1. WARNING: To prevent data loss, always follow the proper removal procedures when disconnecting the DrivePro from your computer. 2.
10. Troubleshooting If a problem occurs with your DrivePro, please first check the instructions listed below before sending your DrivePro for repair. If you cannot find an ideal solution to your question below, please consult your dealer, service center, or local Transcend branch office for further help. You can also visit the Transcend website for FAQ and Technical Support services. For any hardware issues, please refer to the DrivePro User’s Manual.
11. Safety Cautions These usage and safety guidelines are IMPORTANT! Please follow them carefully to ensure your own personal safety, and help protect your DrivePro from potential damages. General Use For in-car use only. For your safety, do not operate the DrivePro, or use the DrivePro App while driving. Avoid placing the DrivePro in an extreme temperature environment. Avoid splashing water or any other liquids on the DrivePro and accessories.
12. Specifications Dimensions: 70.2 mm (L) × 63.1mm (W)× 34.5mm (H) Weight: 78g Connect Interface: USB2.0 Storage Capacity: microSD, 8GB / 16GB / 32GB / 64GB /128GB (Class 10 or above) Wi-Fi 802.11n Panel: 2.4" color LCD Lens: F/2.0, 140° wide angle Video Formats: H.
13. EU Compliance Statement Transcend Information hereby declares that all CE marked Transcend products incorporating radio equipment functionality are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.transcend-info.com/eu_compliance Dashcam / Body Camera series Frequency: Maximum transmit power: 2400-2483.5MHz < 100mW DrivePro Body 60 Frequency: Maximum transmit power: 2400-2483.
14. Recycling and Environmental Protection Recycling the Product (WEEE): Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means that the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.
15. Federal Communications Commission (FCC) Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may cause undesired operation. This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
16. Two-year Limited Warranty Transcend Warranty Policy Please visit www.transcend-info.com/warranty to view the Transcend Warranty Policy. By using the product, you agree that you accept the terms of the Transcend Warranty Policy, which may be amended from time to time. 17. GNU General Public License (GPL) Disclosure Firmware incorporated into this product and/or software used for this product may include third party copyrighted software licensed under the GPL (hereinafter referred to as “GPL Software”).
license, distribute, lease, rent, lend, transfer, assign or otherwise dispose of the Licensed Software or use the Licensed Software in any commercial hosted or service bureau environment; (c) reverse engineer, decompile, disassemble or attempt to discover the source code for or any trade secrets related to the Licensed Software, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation; (d) adapt, modify, alter, translate or create any derivati
10. Miscellaneous. (a) This Agreement constitutes the entire agreement between Transcend and Customer concerning the subject matter hereof, and it may only be modified by a written amendment signed by an authorized executive of Transcend. (b) Except to the extent applicable law, if any, provides otherwise, this Agreement will be governed by the law of the Republic of China, excluding its conflict of law provisions.
