User’s Manual Motorcycle Dashcam ™ DrivePro 20 Version 1.
DrivePro 20 Table of Contents 1. Package Contents ............................................................................................. 3 2. System Requirements ...................................................................................... 3 3. Getting Started .................................................................................................. 4 3-1 Overview ........................................................................................................................
DrivePro 20 1. Package Contents The DrivePro 20 dashcam package includes the following items: DrivePro 20 Camera holder Adhesive mounting base 32GB microSD card Quick Start Guide micro USB to USB Type-A power cable 2. System Requirements Desktop or Notebook computer together with a microSD card reader or an adapter. DrivePro Toolbox supports the following operating systems: Windows® 7 Windows® 8 Windows® 8.1 Windows® 10 macOS 10.
DrivePro 20 3. Getting Started 3-1 Overview 1 ○ 3 ○ 6 ○ 5 ○ 7 ○ 2 ○ 4 ○ 1 Power Button ○ 2 LED Indicator ○ 4 Lens ○ 7 micro USB Port ○ 5 microSD Card Slot ○ 8 Protective Case ○ 3 Microphone ○ 6 Reset Button ○ 9 Lanyard Hole ○ 9 ○ 8 ○ 3-2 Inserting a microSD Memory Card A microSD memory card is required before recording. Please use a microSD memory card with 32GB, 64GB, 128GB or 256GB capacity (Class 10 or above). 1. Rotate protective case anti-clockwise until loose. 2.
DrivePro 20 The following table shows approximate recording time according to capacity and resolution (for reference only): Capacity Frame Rate Full HD 1080P 60 fps 32GB 64GB 128GB 256GB 2.5 hr 5 hr 10.5 hr 22 hr Full HD 1080P 30 fps 3.5 hr 7 hr 14 hr 29 hr HD 720P 60fps 5.5 hr 11 hr 21.5 hr 45 hr HD 720P 30fps 8.5 hr 17 hr 34.5 hr 70 hr 3-3 Mounting the DrivePro NOTE Installation surface should first be cleaned and dried so 3M adhesive pad can be firmly attached.
DrivePro 20 3-5 Operation Status Operation Vibration Turn on/off dashcam Long press Power Button for 3 s Vibration-short Turn on/off Wi-Fi Press Power Button once Vibration-short Reset to default In recording mode, long press Power Button for 10 s Vibration-long Low battery -- Vibrate twice every 30 s -- Vibrate twice every 5 s and turn off after 180 s Disk error 3-6 LED Indicator LED Red Blue Orange Status Description Flashing Recording/Firmware Upgrade Flashing quickly Emergency
DrivePro 20 4. Recording Videos 4-1 Normal Recording By default, one video file is saved for every 1 minute of recording. To adjust the recording length, please refer to the Settings section in this manual. When DrivePro 20 is fully charged, recording in 1080/60fps can last for 2.5 hours, while recording in 1080/30fps can last 3 hours. The actual recording time differs according to the recording condition. When the DrivePro is idle for 5 minutes, power saving mode will be activated.
DrivePro 20 5. Using the DrivePro App 5-1 Connecting to DrivePro App After downloading and installing the DrivePro App from the Google Play or App Store, 1. Tap Settings > Wi-Fi from your mobile device. 2. Select the Wi-Fi network with DP 20 in the SSID. (password is 12345678) 3. Tap the DrivePro icon on the home screen of your mobile device to use the App. 4. Click the links below for detailed operation guidance. iOS: https://help.transcendcloud.com/DrivePro/iOS/EN/connect/ Android: https://help.
DrivePro 20 Date / Time Format Set the current date, time, format and time zone. Device Icon Feature G-Sensor Function/Option Adjust the sensitivity of the G-Sensor. Disable / Low (default) / Medium / High SSID Set Wi-Fi name Password Set Wi-Fi password Turn on/off the power saving mode. If no vibration is detected in Power Management Noise Cancellation 10 minutes, the dashcam will turn off automatically. Disable/Enable (default) Reduce wind noise when wind strikes the surface of the microphone.
DrivePro 20 6. 1. 2. Using the DrivePro Toolbox Download the installation files from https://www.transcend-info.com/Support/Software-180/ Install DrivePro Toolbox software on your computer. 6-1 Toolbox Interface & Operation 6-1-1 Interface C A B 6-1-2 Import Files and Review Snapshots (A) When connecting the DrivePro to a Windows computer, the DrivePro Toolbox will automatically ask users whether to import the videos in the DrivePro.
DrivePro 20 3 Select Date to broadcast the videos ○ 4 Select Group, the videos will be grouped by ○ recorded on a specific day recording date.
DrivePro 20 6-1-4 Video Trimming Step 1: Enable clip mode Step 2: Specify the beginning of video clip 12
DrivePro 20 Step 3: Specify the end of video clip Step 4: Save the video clip 13
DrivePro 20 6-1-5 Preference Settings (C) Tap Preference to change the saving routes of the videos/photos and the language settings. 6-2 Transferring Files To A Computer Option 1: Take the microSD memory card out of the DrivePro, and insert it into a compatible card reader to transfer files to a computer. Option 2: 1. Insert the microSD memory card into the DrivePro. 2. Plug the small end of a USB cable into the USB port located on the right-hand side of the DrivePro. 3.
DrivePro 20 6-3 Firmware Upgrade 1. Download the latest firmware for the camera from the Transcend website. After download, decompress and put it in the “SYSTEM” folder in the microSD memory card. 2. Insert the microSD memory card that contains the latest firmware version. 3. The DrivePro will automatically upgrade the firmware using the latest firmware file. NOTE The firmware upgrade will take about 1-2 minutes. Please do not turn off the DrivePro while upgrading.
DrivePro 20 7. Troubleshooting If a problem occurs with your DrivePro, please first check the instructions listed below before sending your DrivePro for repair. If you cannot find an ideal solution to your question below, please consult your dealer, service center, or local Transcend branch office for further help. You can also visit the Transcend website for FAQ and Technical Support services (https://www.transcend-info.com/Support). For any hardware issues, please refer to the DrivePro User’s Manual.
DrivePro 20 8. Safety Cautions These usage and safety guidelines are IMPORTANT! Please follow them carefully to ensure your own personal safety, and help protect your DrivePro from potential damages. 1. General use For your safety, do not operate the DrivePro, or use the DrivePro App while driving. Avoid placing the DrivePro in an extreme temperature environment. Do not use the DrivePro in an environment with strong magnetic fields or excessive vibration.
DrivePro 20 9. Specifications DrivePro 20 90.2mm x 30mm x 30mm Dimensions 74g (2.6oz) Weight USB2.0 Connect Interface Memory Card Supported microSD, 32GB/64GB/128GB/256GB memory card (Class 10 or above) Wi-Fi 802.11b/g/n Lens F/2.8, 140° (diagonal) MP4 (H.
DrivePro 20 10. Legal Compliance 10-1 EU Compliance Statement Transcend Information hereby declares that all CE marked Transcend products incorporating radio equipment functionality are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.transcend-info.com/eu_compliance Frequency: 2400-2483.
DrivePro 20 may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
DrivePro 20 (“Agreement”), whether provided separately or associated with a Transcend product (“Product”), to the original purchaser of the Product upon or with which the Licensed Software was installed or associated as of the time of purchase ("Customer") only if Customer accepts all of the terms and conditions of this Agreement. PLEASE READ THESE TERMS CAREFULLY. USING THE SOFTWARE WILL CONSTITUTE CUSTOMER'S ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS AGREEMENT.
DrivePro 20 OR OTHERWISE, EVEN IF TRANSCEND HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 7. Limitation of Liability. IN ANY CASE, TRANSCEND 'S LIABILITY ARISING OUT OF OR IN CONNECTION WITH THIS AGREEMENT WILL BE LIMITED TO THE TOTAL AMOUNT ACTUALLY AND ORIGINALLY PAID AT RETAIL BY CUSTOMER FOR THE PRODUCT. The foregoing Disclaimer and Limitation of Liability will apply to the maximum extent permitted by applicable law.
