Owners manual

8
Inserting a microSD Memory Card
You must insert a microSD memory card into the DrivePro before you can start recording. Please use a
Class 6 or above microSD memory card with 8GB, 16GB or 32GB capacity.
1. Insert a microSD memory card into the appropriate card slot on the bottom of the DrivePro.
Note: Always format new memory cards in the DrivePro before using them for the first time. To
format a new memory card, press the Settings button during recording, and select Format Card.
WARNING: DrivePro 520 can only support FAT32 file format, but not NTFS.
 The following table shows approximate recording time according to capacity and resolution (for
reference only):
Card Capacity (FAT32) Full HD 1080P 30fps HD 720P 30fps
8GB 0 hr 50 min 1 hr 10 min
16GB 1 hr 40 min 2 hr 20 min
32GB 3 hr 20 min 4 hr 40 min
2. To remove, push to eject the memory card out of the slot
WARNING: Do not remove the memory card during shutdown to avoid damages to the memory
card and loss of recorded videos