™ StoreJet 1.8 User’s Manual (Version 2.
Table of Contents Introduction ......................................................................................... 3 Package Contents ................................................................................................................................ 3 Features................................................................................................................................................ 4 System Requirements ..................................................................
Introduction Congratulations on purchasing Transcend’s StoreJet™ 1.8. This tiny, Ultra-portable, Hi-Speed USB storage device is the perfect data management system for uploading, downloading, storing and transferring your vital data and information. With a huge storage capacity and Hi-Speed USB 2.0 data transfer rates, the compact StoreJet™ 1.8 is ideal for storing and transferring your files, folders, documents, photos, music and e-work between it and any desktop, or notebook computer.
Features • Hi-Speed USB 2.0 compliant and USB 1.1 backwards compatible • Easy Plug and Play installation • 1.8” Hard Disk Drive • Ultra-Portability • Powered via the USB port. No external power or battery needed • Hi-Speed data transfer rates up to 480Mbits (60MB) per second • LED indicates Power On and data transfer activity • Additional StoreJet Software pack: StoreJet™ elite (helps you manage your data) System Requirements To use the StoreJet™ 1.8 the following are required: 1.
Backing Up Data • Transcend does NOT take any responsibility for data loss, or damage during operation. We strongly advise you to regularly backup the data on your StoreJet™ 1.8 to a computer, or other storage medium. • To ensure High-Speed USB 2.0 data transfer rates when using your StoreJet™ 1.8 with a computer, please check the computer has the relevant USB drivers. If you are unsure on how to check this, please consult the computer or motherboard User’s manual for USB driver information.
Driver Installation Driver Installation for Windows® 2000, XP and VISTA No drivers are required. These Windows operating systems have built-in drivers to support the StoreJet™ 1.8. Simply connect the StoreJet™ 1.8 to the computer using an available USB port and Windows will install the necessary files. A new Removable Disk drive with a newly assigned drive letter will appear in the My Computer window. Driver Installation for Mac™ OS 9.0, or Later No drivers are required. Plug your StoreJet™ 1.
Basic Operation Connecting to a Computer If you want to use the StoreJet™ 1.8 as an External Hard Disk Drive to upload/download data to, or from your computer you will need to connect it to a USB port on the computer using the provided Mini USB to USB A-Type cable. Figure 1. Mini USB to USB A-Type Cable Figure 2. Connecting the StoreJet 1. Connect the Mini USB end-connector of the cable to the Mini USB port on the StoreJet™ 1.8. 2.
Disconnecting from a Computer Removing the StoreJet™ 1.8 in Windows® 2000, XP and VISTA 1. Select the icon on the system tray. 2. The “Safely Remove Hardware” pop-up menu will appear. Select it to continue. 3. A message box will appear: “The ‘USB Mass Storage Device’ device can now be safely removed from the system.” WARNING! To prevent data loss, always use this procedure to remove the StoreJet™ from Windows® 2000, XP and VISTA. Removing the StoreJet™ 1.8 in Mac™ OS 9.
3. Select “Format” in the drop down menu to format the StoreJet™ 1.8. 4. Click Start.
Troubleshooting If an error occurs with your StoreJet™ 1.8, please first check the information listed below before taking your StoreJet™ 1.8 for repair. If you are unable to remedy a problem from the following hints, please consult your dealer, service center, or local Transcend branch office. Transcend also provides an FAQ and Support service on our websites. Driver CD cannot auto-run in Windows® OS Enter the Device Manager in the Control Panel and enable the Auto-Insert function for the CD-ROM drive.
Specifications • Size: 95 mm × 71.5 mm × 15 mm • Weight: 130g • Storage Media: 1.8” Hard Disk Drive • Power Supply: 5V DC supplied from the USB port • Max Transfer Speeds: 480Mbits (60MB) per second • Operating Temperature: 5°C to 60°C • Storage Temperature: -40°C to 70°C • Humidity: 8% to 90% RH • Certificates: CE, FCC Class B, BSMI Ordering Information Product Type Transcend P/N StoreJet™ 1.
Transcend Limited Warranty “Above and Beyond” is the standard we set ourselves for customer service at Transcend. We consistently position ourselves to be significantly above the industry norm, which is all part of our commitment to Customer Satisfaction. All Transcend information, Inc. (Transcend) products are warranted and tested to be free from defects in material and workmanship and to conform to the published specifications. During the warranty period should your Transcend StoreJet™ 1.
