Computer Hardware User's Manual

11 HARDWARE INSTALLATION
2.11 Wake-on-LAN Connector (3-pin WOL)
This connector connects to LAN cards with a Wake-on-LAN output. The system can be powered
up when a wakeup packet or signal is received from the LAN card.
NOTE:This function requires that the Wake-on-LAN Power Up Control is set to En-
abled and that your system has an ATX power supply with at least 720mA +5V standby
power.
2.12 IrDA-Compliant Infrared Module Connector (5-pin IrDA)
The IrDA connector can be configured to support wireless infrared module. With this module and
application software such as Laplink or Win95 Direct Cable Connection, user can transfer files
to or from laptops, notebooks, PDA and printers.
TS-ABX31 Wake-
o
Transcend
DIMM1 (64/72bit 168pin SDRAM Module)
DIMM2 (64/72bit 168pin SDRAM Module)
DIMM2 (64/72bit 168pin SDRAM Module)
COM1
Printer
Parallel Port
AGP
PCI Slot1 (PCI1)
PCI Slot4 (PCI4)
PCI Slot2 (PCI2)
PCI Slot3 (PCI3)
ISA Slot1 (ISA1)
ISA Slot2 (ISA2)
Intel443ZXAGP Set
IntelPIIX4ChipSet
CR2032 3VLithium Cell
Primary IDE Connector
Second IDE Connector
Floppy Connector
2Mbit Flash (BIOS)
Multi-I/O&KeyboardController
FrequencyDIP Switch
PANEL
Panel Switch
IDE1IDE2
CASE-FAN
CPU-FAN
FDC
PCI1
PCI2
PCI3
PCI4
ISA1
ISA2
IrDA
Infrared Port
WOL
Wake On LAN
AGP
COMA
Thermal Sensor
CMOS_CLR
HardwareMonitor
TS-ABX31 IrD
A
Transcend
DIMM1 (64/72bit 168pin SDRAM Module)
DIMM2 (64/72bit 168pin SDRAM Module)
DIMM2 (64/72bit 168pin SDRAM Module)
COM1
AGP
PCI Slot1 (PCI1)
PCI Slot4 (PCI4)
PCI Slot2 (PCI2)
PCI Slot3 (PCI3)
ISA Slot1 (ISA1)
ISA Slot2 (ISA2)
Intel443ZXAGP Set
IntelPIIX4ChipSet
CR2032 3VLithium Cell
Primary IDE Connector
Second IDE Connector
Floppy Connector
2Mbit Flash (BIOS)
Multi-I/O&KeyboardController
FrequencyDIP Switch
PANEL
Panel Switch
IDE1IDE2
CASE-FAN
CPU-FAN
FDC
PCI1
PCI2
PCI3
PCI4
ISA1
ISA2
IrDA
Infrared Port
WOL
Wake On LAN
AGP
COMA
CMOS_CLR
HardwareMonitor
o
n-LAN Connector
PS/2
T:Mouse B:Keyboard
USB
T:Port 1 B:Port 2
COM2
ATX Power Connector
POWER-FANPWR-CONN
KB MOUSE
USB
COMB
KB-AWK
+5 Volt Standby
Ground
PME
WOL
A
Connector
Socket 370
PS/2
T:Mouse B:Keyboard
USB
T:Port 1 B:Port 2
COM2
Printer
Parallel Port
ATX Power Connector
POWER-FANPWR-CONN
PGA 370
KB MOUSE
USB
COMB
Thermal Sensor
KB-AWK
IrDA
15
+5V
NC
IRRX
GND
IRTX