User's Manual

Clean the DrivePro Body 52 surface with a soft cloth slightly moistened with water, then wipe the
surface with a dry cloth. Do not use any of the following as they may damage the finish or the casing:
 Chemical products such as thinner, benzine, alcohol, disposable cloths, insect repellent,
sunscreen orinsecticide, etc.
 Do not touch the camera with any of the above on your hand.
 Do not leave the camera in contact with rubber or vinyl for a long time.
Moisture condensation
 If the DrivePro Body 52 is brought directly from a cold to a warm place (or vice versa), moisture
may condense inside or outside the camera. This moisture condensation may cause
malfunction of the DrivePro Body 52.
 If moisture condensation occurs, turn off the DrivePro Body 52 and wait about 1 hour for the
moisture to evaporate.