User's Manual

12345678).
Version: Tap to upgrade the firmware to the latest version.
WARNING: NEVER remove the power cord or the microSD memory card while the firmware
is being upgraded.
1. The DrivePro 520 will shut down and the red LED light will flash while the firmware is being
upgraded. After the upgrade is complete, the DrivePro will restart automatically.
2. If the DrivePro cannot be turned on due to firmware upgrade failure, please contact
Transcend customer service for technical support.
7. Using the DrivePro Body Toolbox™ Software
The DrivePro Body Toolbox, developed for Windows, features a user-friendly interface that allows you to
easily back up the recorded files to your database.
1. Download the installation files from: http://www.transcend-info.com/downloads
2. Install DrivePro Toolbox software on your desktop or laptop.
8. Precautions
Do not use or store the DrivePro Body 52 in the following places to prevent malfunction or
deformation:
 In extremely hot, cold or humid places such as in a car parked in the sun
 Under direct sunlight or near a heater
 Near strong magnetic fields
 In sandy or dusty places
Care and storage of the DrivePro Body 52 lens
 Wipe the surface of the lens clean with a soft cloth in the following cases:
When there are fingerprints on the lens surface
When the lens is exposed to salty air such as at the seaside
 Store in a well-ventilated location subject to little dirt or dust
 To prevent mold, periodically clean the lens as described above
Cleaning