User's Manual

During Parking mode, the LCD display will turn off; the LED indicator will be solid red on standby.

When a motion or collision of the vehicle is detected, the DrivePro will record footage of about 15

seconds; the display will turn on and the LED will flash red. The display will turn off again if no more

motion/collision is detected in about 15 seconds. The DrivePro will resume Normal Recording

mode when the engine is switched on again (connected to power).

Transcend’s car lighter adapter does not supply power after the engine is switched off. If long-term

recording in Parking mode is required, please use an external power supply. Enter the Parking mode

manually by long-pressing the

button during video recording. To power off the DrivePro,

long-press the

button again.

Low Battery

Please charge the DrivePro immediately after the Low Battery warning is shown onscreen to avoid

errors happening to the system time. Please avoid using the built-in battery to record videos

directly.

Note: Please fully charge the DrivePro before using.