Brochure

75
4
Ø 76
Ø 100
Ø 168
>
>
PROCEDURE
Manually open the jaws of the clamp
and insert the aluminium pipe into the
clamp as far as it will go.
Release the jaws. Press the trigger
and crimp the tube until a ‘snap’
sound is heard.
Re-open the two jaws to remove
the pipe.
Position the clamp end next to the
lug mark: this will avoid the lugs
overlapping.
Rotate the pipe slightly.
Repeat the operation until the
required minimum number of
lugs for each diameter is
achieved.
Number
of lugs
IMPORTANT: DO NOT OVERLAP THE LUGS!
INSTALLATION GUIDE