Brochure

138
Ø 22 Ø 28 Ø 42
Ø 60 Ø 76 Ø 100
22.0 19.6 0.30 0.627 0.929
28.0 25.6 0.51 0.808 1.323
42.3 39.1 1.20 1.616 2.817
60.3 57.1 2.56 2.331 4.892
76.1 72.9 4.17 2.958 7.132
101.6 97.6 7.48 4.944 12.425
Manufacturing Standards
EN 10217-7 EN 10217-7 EN 10217-7
Grade EN 10088-2, 1.4404 / AISI 316 L 1.4301 / AISI 304 1.4301 / AISI 304
Welding Standards DIN 17 457, EN 10217-7 DIN 17 457, EN 10217-7 DIN 17 457, EN 10217-7
Tolerances DVGW - W541 EN 1127 D4 / T3 EN 1127 D4 / T3
General
TRANSAIR
®
STAINLESS STEEL PIPE
PRESENTATION
Transair
®
stainless steel pipe is supplied “ready for use”. No particular preparation (cutting, deburring, chamfering, etc.) is
required. Thanks to the rigidity of Transair
®
stainless steel pipe, temperature-related expansion / contraction phenomena
are reduced to a minimum. The Transair
®
network retains its straightness, and hence its performance, over time (reduction
of pressure drop caused by surface friction).Transair
®
stainless steel pipe is calibrated and fits perfectly onto all Transair
®
components. Each connection is automatically secured and sealing is, thus, optimized. The use of Transair
®
stainless steel
pipe minimises corrosion.
DEBURRED AND
CHAMFERED PIPE
DEBURRED AND
CHAMFERED PIPE
PIPE LUGGED AT EACH END
DEBURRED
AND CHAMFERED
PIPE LUGGED AT EACH END
DEBURRED
AND CHAMFERED
PIPE LUGGED AT EACH END
DEBURRED
AND CHAMFERED
PIPE LUGGED AT EACH END
DEBURRED
AND CHAMFERED
Ø 22 - Ø 28 Ø 42 - Ø 60 Ø 76 - Ø 100
STANDARDS
VOLUME AND MASS
Value for 1 metre of pipe
Ø ext
(mm)
Ø int
(mm)
Volume (l) Pipe Mass (kg)
Mass of the Network
Full of Water(kg)