Brochure
Table Of Contents
1010
Product Quality
All Transair
®
products are tested and controlled at every stage of the production
process to ensure maximum efficiency for the user. Our products have to succeed a
series of drastic tests: static and dynamic leak tests, burst pressure, cycled pressure
and accelerated ageing tests.
I
TÜV Rheinland certifies that Transair
®
products
fulfill regulatory requirements for pipes under pressure
according to the German AD-2000 Merkblatt technical
rules and to the European Pressure Equipment Directive
2014/68/EU (DESP).
Quality System
Requirements Related to
I
The Transair
®
products meet the requirements of ASME
B31.1 and of ASME B31.3.
The Transair
®
products are approved by the Technical
Standards & Safety Authority (TSSA) and registered
under the Canadian Registration Number (CRN).
I
The Transair
®
products conform the European Pressure
Equipment Directive 2014/68/EU. The aims of Directive
2014/68/EU are to maintain a sufficient level of safety in
the tanks, generators and piping.
I
Parker Hannifin is certified ISO 9001 version 2008 and ISO TS 16949 version 2009.
ISO TS, based on Automotive Industry standards, is one of the most demanding.
I
Parker Hannifin is certified ISO 14001 for its Environmental
Management System, which requires to reduce the impact
on the environment when manufacturing a product and
launching it on the market.
I
All Transair
®
products are in compliance with the
REACH and RoHS directives which limit the use of
hazardous substances.
I
When launching a new product, an Eco-design best
practice and a life-cycle analysis are carried out to
reduce the long term impact on the environment.
Transair
®
pRoduCTS
STANdARd ANd REGuLATIoN uNIvERSE