Manualshelf

Printer User Manual

ManualsBrandsTransAct Technologies ManualsPrinterITHERM 280
919293949596979899100
Programming Codes iTherm
®
280 Programmer’s Guide
Page 92 Rev C 28-07764
m/203 (m/8) Dot Width
n/203 (n/8)
Cut to Center of black dot
Back of Ticket
0.8 (.20) to first line of print
Dimensions in Inches (mm)
Note:
This command interacts with the Feed to Black Dot command. If
the Black Dot paper Option is set, the black dot position specified by this
command will be used for the Cover Close operation.