User's Manual

Safety Precautions
100-TBD - Rev A Page 11
Important Safety Precautions
General Precautions
x Use this equipment only for the intended use described in this guide.
x Do not use power supplies outside the specified voltage/hertz range.
x Do not block any openings on the equipment.
x Do not use corrosive chemicals or vapors on or near the equipment.
x Do not expose equipment to rain, spills, or moisture.
Grounding
x This equipment must be grounded to conform with legal and safety
standards. Connect only to a properly grounded outlet.
Power Supply and Power Cord
To avoid the risk of fire, electrical shock, personal injury, or damage to the
printer:
x Always use the power cord provided with this printer. The power cord
supplied with the equipment is rated and approved for service to this
equipment.
x Make sure that the power plug is securely and completely inserted into the
power source.
x Do not cut, damage, or otherwise alter the power cord. Never place a
heavy object on the power cord, never expose it to heat, and never pull the
cord to disconnect it. If the power cord is damaged in any way
(condensation on exposed wires, broken wires, etc.) contact customer
service where you purchased the printer.
x Do not immerse the power cord or plug in water. Never handle the power
cord or plug when your hands are wet.
x Never knot the power cord or wrap it around itself.
x Turn off the main power before removing the power plug from the outlet.
x Check the power plug and cord for any problem (abnormal heat, rust,
bend, cracks, scratches, etc.) at least once a month.
x If any problem is found with the power plug or cord, contact customer
service regarding a replacement cord/
x Never pull on the power cord to unplug the cord from the power supply.
Always grip the plug to remove it from the power supply.
x Always keep the area around the power plug free of obstacles so that you
can unplug it easily. This allows you to unplug the power cord quickly in an
emergency.