User's Manual

M-FALCON2 Rev B

ALARM SECTION:

Data Rate: 19,200 bps

Coding Scheme: 32 bit command/address, 8 bit data

with checksum

Output Level: Reflects state of transmitter alarm

inputs – updated twice per second

POWER SECTION:

Input Voltage Range: 7 Vdc nominal, 6-9 Vdc

Max. Ripple Input: 1 Vpp

Current Consumption:450 mA nominal in receive mode and

RSSI mode

DATA PASS THROUGH MODE:

Protocol: Simplex, 3-wire, RS-232 levels, using

serial port

Serial Port Settings: 1200, 2400, 4800, 9600 bps with

adjustable parity (even, odd, none –

8,N,1 Standard), configurable with

TrangoLink software

Latency: < 15 mS end to end

BER: < 1E10

-6

at –80 dBm input signal level

Note: RS-422/485 interface available

with optional daughter board.