User's Manual

M-FALCON2 Rev B
Copyright © 2000 Trango Systems, Inc. (All rights reserved)
40
AUDIO SECTION:
Input Level: 1 Vpp Nominal
Input Impedance: 600Ω
Bandwidth: 50 Hz – 15 kHz (3 dB)
Modulation: Wideband FM
Subcarriers: 6.0 MHz (right) and 6.5 MHz
(left-monaural)
Modulation Index: 1.0 at 75 kHz for audio (±75 kHz
deviation)
Pre-emphasis: 75 µS
ALARM SECTION:
Input Level: Normally open contact closure input
on both Alarm 1 and Alarm 2. The
current state of the input (open or
closed) is transmitted to the receiver
which reflects the transmitter alarm
input states. DO NOT APPLY VOLTAGES
TO THESE INPUTS AS DAMAGE TO THE
UNIT WILL OCCUR.
POWER SECTION:
Input Voltage: 7 Vdc nominal, 6-12 Vdc range
Current Consumption:200 mA typical in normal mode,
10 mA in Standby mode
Max. Ripple Input: 1 Vpp
Low Battery Sens.: < 6 Vdc