User's Manual

M-FALCON2 Rev B

SCREEN CONTROLS:

Current Channel: This must be the same on the

transmitter and receiver in order for video, alarms,

and/or data to be transmitted properly.

Select Mode: The Normal button places the transmitter

in Normal mode or awakens it from Standby mode. The

Standby button places the transmitter in either Secure

Standby or Power Save Standby, depending on the

value entered in the Power Save Timer field.

Power Save Timer: The Falcon PLUS™ can reenter

Standby mode after a preset amount of time has passed,

which can be entered in the Power Save Timer field

(Power Save Standby mode). If zero is entered, the

transmitter will not reenter Standby mode (Secure

Standby mode). To enter a new value, type the desired

number of minutes into the Power Save Standby field,

and press the “Set new value” button.

In Figure 6, the TrangoLink interface screen shows that

the transmitter is set to Channel 3, in Normal mode (not

Standby), with the Power Save timer set to 0 minutes

(Secure Standby). In this configuration, the transmitter

will not reenter Standby mode after awakening.