User's Manual

M-FALCON2 Rev B
Copyright © 2000 Trango Systems, Inc. (All rights reserved)
30
TrangoLink™ Software with the
Falcon PLUS™ System
PC Requirements & Installation:
In order to run TrangoLink, you will need Windows 95 or
higher, 400 kB of free disk space, and one free 9-pin serial
port.
To install:
The TrangoLink program that can be found at our
website at http://www.trangosys.com/ is a self-
extracting and installing file. To install TrangoLink on
your PC, simply download the file and double-click
on it.
To uninstall:
1. Click on Start, then Settings, then Control
Panel.
2. Double click on Add/Remove Programs.
3. Select TrangoLink, and click Add/Remove.
TrangoLink with the Falcon PLUS™ System:
The TrangoLink software allows the user to change the user
settings on the Falcon PLUS™ transmitters and receivers.
The software runs under the Windows 95 or higher PC
platform and connects from COM1-4 to the Data interface
on the transmitter or receiver via the CBLDAT-1 interface
cable.
To enter the program, the user must apply power to the
connected unit and run the TrangoLink program by clicking
on the TrangoLink icon in Start/Programs.