User's Manual

Copyright © 1999 Trango Systems, Inc. All rights reserved.
19
Standby or Power Save Standby, depending on the value entered in the Power Save
Timer field.
Power Save Timer: The FALCON PLUS can reenter Standby mode after a preset
amount of time has passed, which can be entered in the Power Save Timer field
(Power Save Standby mode). If zero is entered, the transmitter will not reenter
Standby mode (Secure Standby mode). To enter a new value, type the desired
number of minutes into the Power Save Standby field, and press the “Set new value”
button.
In Fig. 6, the TrangoLink
interface screen shows that the
transmitter is set to Channel 3, in
Normal mode (not Standby),
with the Power Save timer set to
0 minutes (Secure Standby). In
this configuration, the transmitter
will not reenter Standby mode
after awakening.
Fig. 6