User's Manual

PC Requirements & Installation:

In order to run TrangoLink, you will need Windows 95 or higher, 400 kB of free disk

space, and one free 9-pin serial port.

To install:

The TrangoLink program which can be found at our website at

http://www.trangosys.com/ is a self-extracting and installing file. To install

TrangoLink on your PC, simply download the file and double-click on it.

To uninstall:

1. Click on Start, then Settings, then Control Panel.

2. Double click on Add/Remove Programs.

3. Select TrangoLink, and click Add/Remove.

TrangoLink with the FALCON PLUS System:

The TrangoLink software allows the user to change the user settings on the FALCON

PLUS transmitters and receivers. The software runs under the Windows 95 or higher PC

platform and connects from COM1-4 to the Data interface on the transmitter or receiver

via the CBLDAT-1 interface cable.

To enter the program, the user must apply power to the connected unit and run the

TrangoLink program by clicking on the TrangoLink icon in Start/Programs.

After entering the program, a screen is displayed showing the current settings, which can

be changed by the user.