User Manual

Installation Hints:

The STINGRAY system is factory-configured for operation on channel 1 with right and

left audio operational. The system has a very directional transmission pattern that

increases the transmission range while rejecting interference. If installed properly, the

system will provide superior picture quality, even when transmitting through walls in a

typical home or office setup.

To obtain the best picture quality and transmission distance, the following rules of thumb

should be followed:

Mount the transmitter and receiver antennas above human and mechanical traffic

but away from metallic objects.

Keep the transmission path as open as possible. Objects such as walls, ceilings

and metallic objects near the transmission path can reflect signals and may reduce the

transmission distance.

If operating more than one system in an area, set the channels as far apart as

possible on each system (i.e. system 1 use channel 1, system 2 use channel 4).