User's Manual

Trango Systems, Inc. StrataPro 24 Quick Start Guide 7

Radio Management

There are three ways to manage the StrataPro System:

1) In-Band Management (IBM) without a VLAN using the management port (default

P1). Only traffic coming into the radio from management port or the RF with the

Radio MAC address will be forwarded to the CPU and all other traffic will be

forwarded to over the link. This is the default configuration.

2) In- Band Management (IBM) with a VLAN using the management port (default

P1). . Only traffic coming into the radio on the management port or the RF with

a matching VLAN ID and the Radio MAC address will be forwarded to the CPU. All

other traffic will be forwarded over the link. The VLAN tagging option must be

enabled and the VLAN ID set.

3) Out- of- Band Management (OBM). The system will pass management traffic

coming into the OBM port to the CPU and not forward any traffic across the link

from this port. Disable IBM to enable OBM on the current management port.

Using the web interface is the easiest way to set up the system. Both sides of the link

can be set via a web session with only one radio.

Management of the radio may be done via the following interfaces:

1) Web Browser

2) Telnet

3) SSH

4) Console port

This Quick Start Guide covers the basic Web based setup. For other interfaces, please

read the User Manual.

The radio has two levels of access, View and Config. View allows only viewing of the

various parameters while config allows changing them. The default login and passwords