User's Manual

Appendix B Specifications
Trango Broadband Wireless — Atlas5055 page 49
Power Parameters
Input Voltage: Input voltage range at unit is 15 VDC to 24 VDC max. Power is supplied
on Ethernet cable using junction box provided with up to 330 foot 24 AWG
STP cable.
Current Cons.: Max 600 mA in transmit and receive modes using 24 V standard adapter (12 W) with
short Ethernet cable from Junction box to radio.
Power Supply
Type: Switch mode wall mount transformer
Safety: PSE, UL, CUL, GS
EMI: FCC Class B, VCC-II, CE
Input: 90 – 255 VAC
Plug Type: Includes 4 plug blades for to allow use in US, Europe, UK and Australia
Output: 24 VDC +/- 1 V
Max current: 1000 mA
Antennas
Integrated 19 dBi Antenna (for P5055M-19-xx)
Frequency range: 4950-5850 MHz
Gain: 19 dBi +/- 1 dB
Front/Back Ratio >30 dB
E-Plane Beamwidth: > 18 degrees typical
H-Plane Beamwidth: > 18 degrees typical
Polarization: Vertical and Horizontal
Port/Port Isolation: 20 dB typ
Cross Pol Rejection: 20 dB typ
VSWR: <1.7:1
Package: Alumininum backplate with plastic radome.
Dimensions: 8.5" x 7.75" x 1.25" (216mm x 197mm x 32mm)
Weight: 2 lbs (.91Kg)
Mounting Provisions: Mounting kit supplied for up to 3”diam pole or flat surface
Azimuth/El Adjust: +/-30 degrees
Sealing: Water tight to 1 meter IEC 529/IP67
Temp Range: -40 deg F to +160 deg F (-40 deg C to +60 deg C)
Wind speed operational: 100 mph (160 km/hr)
Wind speed survival : 140 mph (220 km/hr)
Integrated 23 dBi Antenna (for P5055M-23-xx)
Frequency range: 4950-5850 MHz
Gain: 23 dBi +/- 1 dB
Front/Back Ratio >35 dB
E-Plane Beamwidth: > 9 degrees typical
H-Plane Beamwidth: > 9 degrees typical
Polarization: Vertical and Horizontal
Port/Port Isolation: 40 dB typ
Cross Pol Rejection: 25 dB typ
VSWR: <1.7:1
Package: Alumininum backplate with plastic radome.
Dimensions: 14.6”x 14.6”x 1.58” (371mm x 371mm x 40mm)
Weight: 5.5 lbs (2.5 kg)
Mounting Provisions: Mounting kit supplied for up to 3”diam pole or flat surface
Azimuth/El Adjust: +/-30 degrees