User's Manual

Preface
Trango Broadband Wireless — Atlas5055 page iv
Preface
This manual covers the basic configuration and installation of the Atlas5055 Wireless Point to Point Broadband System,
and applies to the following radio part numbers:
P5055M-19-xx Radio unit with internal 19 dBi patch antenna array
P5055M-23-xx Radio unit with internal 23 dBi patch antenna array
P5055M-EXT-xx Radio unit with external antenna connectors
Where “xx” denotes the regulatory configuration of the unit as follows:
US: For use in the USA and Canada
EU: For use in the following EU member and non-member countries:
Austria
Belgium
Cyprus
Czech
Denmark
Estonia
Finland
France
Germany
Greece
Hungary
Iceland (Non Members)
Ireland
Italy
Latvia
Lithuania
Luxembourg
Malta
Norway (Non Members)
Poland
Portugal
Slovak Republic
Slovenia
Spain
Sweden
Netherlands
United Kingdom
Switzerland (Non Members)
Bulgaria
Romania
OE: OEM model
Each radio unit is supplied with the proper mounting hardware, a power adapter, and POE box with LED indicators.
Cables must be supplied by the installer.
Two radio units are required to make a Atlas5055 link. The P5055M-EXT-xx must be used in conjunction with an
approved external antenna (sold separately). Instead of an internal antenna, the P5055M-EXT-xx has two reverse polarity
SMA RF Connectors for the attachment of external antenna cables. The P5055M-EXT-xx requires professional
installation due to FCC limits on output power settings when operating in the UNII band. See Page 28 for special
instructions on setting U-NII output power limits when installing the P5055M-EXT-xx