User Manual

rev A Trango Systems, Inc. 3
The MTX-2500
™
Wireless Video/Audio Transmitter
Congratulations on choosing the MTX-2500 video/audio transmitter
from Trango Systems. When unpacking the unit, verify that the follow-
ing items are present:
• MTX-2500 transmitter
• attached omnidirectional antenna
• combination input cable with connectors for power (nine-volt battery)
and audio (RCA)
If any items are missing, notify your sales representative. If an item
appears to be damaged from shipment, replace it in its packing mate-
rial and notify the shipper.
Important! Intentional or unintentional changes or modifications to
this transmitter not expressly approved by the party responsible for
compliance, must not be made. Any such modifications could void the
user’s authority to operate the equipment and will void the manufac-
turer’s warranty.
System Description
The MTX-2500 is a miniature wireless video/audio transmitter designed
for transmitting composite NTSC or PAL video and audio signals simul-
taneously using 2.4GHz wireless technology.
The system is ideal for short range transmission where small size, mo-
bility, and low current consumption are required. Due to the nature of
radio frequency (RF) transmission characteristics, the unit will perform
best while stationary, and not moving. A moving transmitter will cause
noticeable intermittent interference at the receiver, and this is normal.