User Manual

Basic Configuration via Browser Interface
Trango Broadband Wireless — User Manual Access5830 Rev. D
Page 10
. To set up an SU in the SU Database, complete the following steps:
1. Connect to the AP (see Getting Started) and open the Subscriber Database page.
2. Enter SU ID
3. Select: either PRIORITY or REGULAR.
4. If SU will be part of an SU to SU group, enter the SU to SU group number.
5. CIR up: (SU to AP Committed Information Rate) – minimum upstream bandwidth for the SU in Kbps.
6. CIR dn: (AP to SU Committed Information Rate) – minimum downstream bandwidth for the SU in Kbps.
7. MIR up: (SU to AP Maximum Information Rate) – maximum upstream bandwidth for the SU in Kbps.
8. MIR dn: (AP to SU Maximum Information Rate) – maximum downstream bandwidth for the SU in Kbps.
9. Device ID is the MAC Address of the SU
10. Save and Activate changes
!
Important! Always remember to Save and Activate changes, or the SUDB will revert back to its previous state after power cycle or
reboot.