User Manual

Copyright © 1999 Sunstream Wireless, LLC All rights reserved.
9
CAUTION CAUTION
WHEN THE UNIT IS IN OPERATION AVOID STANDING DIRECTLY IN
FRONT OF THE ANTENNA. STRONG RF FIELDS ARE PRESENT WHEN
THE TRANSMITTER IS ON.
M5800SB-AP-60 Specifications
Receiver Section
Radio Section
LO Frequencies:
Default channel plan- Channel 1: 5.256 GHz
Channel 2: 5.276 GHz
Channel 3: 5.396 GHz
Channel 4: 5.316 GHz
Channel 5: 5.336 GHz
Channel 6: 5.356 GHz
Channels 7-32: not programmed
Cascade Noise Figure: < 6 dB
Sensitivity for 1E10-6 BER: - 80 dBm max 1000 byte packets
Adj. Channel Rejection: > 20 dB
Image Rejection: > 60 dB
Frequency Plan: Single conversion, IF at 480 MHz
LO stability: .000435 % PLL Stabilized (4.35 ppm) over temp
Input compression point: > -10 dBm
Data Output Section
Buffer size: 128K Bytes
Data Rate (User): 9.5 MBPS Maximum sustained throughput
Format: 10/100 BaseT IEEE 802.3 Ethernet compliant
Mechanical and Environmental
General
Material: Powdercoated aluminum base with polycarbonate radome
Size: 12.5”x5”x8” including mounting studs
Weight: 4 lb
Mounting: Grey steel pole/wall mount
Connectors/Indicators
RF Output: MCX for integral dual pol antenna
SMA per Part 15C, 15.203.
FCC Compliance: The transmitter shall comply with the following:
FCC Part 15.405, 15.407