User Manual

Access Point Manual Page 4 of 9
SunStream Wireless, a division of Trango Systems, Inc. Copyright © 2001
One (1) length of CAT5 cable, not to exceed 50 meters, to carry Ethernet traffic.
This cable will be connected one on end to the Junction Box and the other end to a
Network Interface Card (NIC); i.e., router and/or PC (depending on wiring).
Appropriate hardware tools such as adjustable wrench, Ethernet crimping tool,
wire-cutter/stripper, Philips screwdriver and/or ladder.
Lastly, access to a laptop PC will be useful to poll the serial port of the Subscriber
Unit radio for setup and troubleshooting. The PC should be running Windows95 or
later and have a free COM port and a serial interface utility (e.g., HyperTerminal).
Installers may wish to purchase the CBLDAT-1 (this is a serial port to RJ11 converter
cable).