User's Manual
Getting Started
Trango Broadband Wireless — User Manual M2400S Rev. A
Page
4
The radio’s model number, FCC ID, MAC ID, and Serial # are located on the back side of the radio.
Back of Radio
Side of Radio & Location of Reverse Polarity SMA Connector
6.300
.600
Section 3 Getting Started
This section explains how to power your radios, establish TCP/IP connectivity to the radios, as well as
how to access the HTTP browser and the command line interfaces.
Connections and Power
Connection and powering of radios is the same for APs and SUs.
• Connect a Cat-5 (straight through) Ethernet cable (we recommend shielded twisted pair)
between the Radio port of the J-box and the RJ-45 connector on the radio. Note: this cable will
carry Power over Ethernet (PoE).
Trango Broadband Wireless
M24000S-AP Rev. A
S/N: 00000XXXX
MAC: 00 01 DE 00 02 F3
FCC ID: NCYM2400SAP
Canada: XXXXXXXXXX
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are