User's Manual

Hardware Overview
Trango Broadband Wireless — User Manual M2400S Rev. A
Page
3
Section 2 Hardware Overview
This section provides detail about each radio in the M2400S family. Each radio in the M2400S family
includes built-in, electronically switchable, dual-polarized antenna as well as a reverse polarity SMA
connector for the attachment of an external antenna. For ease of installation all units are designed for
outdoor installation and powered by Power-over-Ethernet (POE). The M2400S Access Point and
subscriber units provide channels of operation within the 2400 MHz ISM band which spans from 2400
MHz to 2483 MHz. Default channel spacing is 10 MHz, allowing for 8 non-overlapping channels.
M2400S AP and SU Hardware Components
Each radio comes equipped with the radio itself, a power-over-Ethernet (PoE) J-Box, an AC adapter, and
mounting hardware.
Basic Components of an M2400S Radio
Bottom of Radio
At the bottom of the M2400S are two access ports: a twist-on weatherproof cable port for RJ-45 Ethernet
(and PoE), and a translucent access cover plug over the unit’s diagnostic LEDs and reset button. The
LEDs will be discussed later in this text.