User's Manual

Management
Trango Broadband Wireless — User Manual M2400S Rev A
Page
40
By default, the Read Community is set to “public”, and the Write Community is set to “private” in the AP. The
Trap Community is “SNMP_trap”. The manager needs to have the same settings in order to communicate
with the AP successfully.
To send traps from the AP set the following:
trap destination IP (Trango MIB object trapconfig–trapconfigInfo)
trap community string (Trango MIB object trapconfig–aptrpTable-AptrpEntry)
enable each trap (Trango MIB object traponfig–aptrpTable-AptrpEntry)