User's Manual

Basic Configuration via CLI
Trango Broadband Wireless — User Manual M2400S Rev A
Page
27
SU SYSTEM INFORMATION PARAMETERS AND RELATED COMMANDS
SU Parameter Description Related CLI Command
to telnet or HTTP into the
SU.
#>sw 2 off
TCP/IP for Local
Ethernet Port
The software switch (6)
when on, allows users on
the wired side of the SU to
telnet or HTTP into the SU
regardless of opmode.
sw 6 [on|off] (default is on)
Remarks User definable radio
information (i.e. customer
name, address of
installation, and so on).
Maximum of 28 characters
can be stored.
remarks [remarks]
Example:
#>remarks 678 Oak Ave
Counters:
RF Tx RF Rx
Eth Tx Eth Rx
This is an average of
wired and wireless,
transmit and received
traffic in kilobits per
second.
Informational Parameter