User's Manual
Basic Configuration via Browser Interface
Trango Broadband Wireless — User Manual M2400S Rev A
Page
17
On this page the user can immediately see which SUs are currently associated. In the page shown, SU
ID# 1 is associated, and SU ID# 17 is not. Consider "Power Off" status synonymous with "not
associated."
RF Link
Loopback Test
The RF Link Loopback
Test is one of the built-in
tools for evaluating the
quality of the wireless
link. Specify an SU ID
and time in minutes to
conduct the test. The
test is prioritized, so it
will take precedence
over all other traffic.
1600 byte packets are
sent and received
between the SU and AP
at 50 millisecond
intervals over the time
specified.