User's Manual
Basic Configuration via Browser Interface
Trango Broadband Wireless ā User Manual M2400S Rev A
Page
12
ī Note: SUs using SU to SU communication must be on the same subnet.
CIR UP: Committed Information Rate from SU to AP. Minimum upstream rate (measured in
Kbps) at which the SU will attempt to deliver bandwidth to the AP. Maximum setting
is 5200.
CIR DOWN: Committed Information Rate from AP to SU. Minimum downstream rate (measured in
Kbps) at which the AP will attempt to deliver bandwidth to that SU. Maximum setting
is 5200.
MIR UP: Maximum Information Rate from SU to AP. Maximum upstream rate (measured in
Kbps) at which the SU will attempt to deliver bandwidth to the AP. Maximum setting
is 5200.
MIR DOWN: Maximum Information Rate from AP to SU. Maximum rate (measured in Kbps) at
which the AP will attempt to deliver bandwidth to that SU. Maximum setting is 5200.
DEVICE ID: MAC address of the SU. The MAC address and the APās BASE ID are the basis for
authentication with the AP.
Creating an SU in the SU Database.
1. Connect to the AP (see Getting Started) and open the Subscriber Database page.
2. Enter the SU ID (range 1 ā 126)
3. Select either PRIORITY or REGULAR.
4. If the SU will be part of an SU to SU group, enter the SU to SU group number.