User's Manual
Getting Started
Trango Broadband Wireless — User Manual M2400S Rev. A
Page
8
Web Browser System Information Page
Note: System Information screen for subscriber unit is similar and is covered in detail later in this text.
Primary Features and Pages of the Browser Interface:
Navigation Column: Each page features a navigation column which runs along the left-hand side of the
page. The model number of the radio is listed at the top of the navigation column. On the bottom of the
navigation column is the Current Status of the radio including its Base ID, current Opmode, channel,
antenna selection, and frequency.
The navigation column also features links to each of the following pages:
System Information: This page shows most of the basic configuration parameters of the radio. It is the
first page shown after login.
Configuration: The essential parameters, such as Base ID, IP, Subnet, gateway, channel, and antenna
polarization are set here.
Advanced Setup: The advanced RF parameters, such as transmit power, receiver threshold control,
and channel center frequencies are set here.
Site Survey: With Opmode Off, the user can conduct a spectrum analysis using this page.
Subscriber Database: This is the page for defining which SUs can associate to the AP.