Installation Guide

Trango Broadband Wireless — M2400S Professional Installation Guide Rev. A Draft

Page

Section 3 6.0 INSTALLATION INSTRUCTIONS

The radio may be installed on a pole using the supplied mounting hardware per the drawing below:

POLE MOUNTING

TO ANTENNA

Please see the M2400S User Manual for instruction on grounding and weatherproofing the installation. In

addition to the guidelines listed in the User Manual, installers must cover cable-SMA connector with heat

shrink tubing to provide weatherproofing of the RF cable connector.

Sectoral Antenna

Pacific Wireless part number SA24-90-17 is shown below. Please see the manufacturer’s installation

and safety instructions for guidance on installation. The antenna features a female N-type connector.

To attach the antenna to the M2400S use N-SMA adapter with the following specifications: REVERSE

POLARITY SMA MALE TO STANDARD N MALE-50 OHM, RG142B/U COAX, DOUBLE SHIELDED.

Length 24" – 36”. (suggested manufacturer Pasternack Model No. PE34361-36.)