Installation and Maintenance Manual

Wireless Sensors
84 UNT-SVX07D-EN
Some systems allow
you to select both
heating and cooling
room temperature
settings. If your
system has this
option, this symbol
appears when you
adjust the
temperature setting.
1. Press or to
select the heating/
cooling setting.
2. If in cooling mode,
press to change to
heating mode. If in
heating mode, press
to change to cooling
mode.
3. Press or to
select the heating/
cooling setting.
4. To confirm, press or
wait 5 seconds. The
home screen will
appear.
When you adjust the
cooling setting, the
top arrow and
snowflake flash.
When you adjust the
heating setting, the
bottom arrow and
flame flash.
Indicates that the
fan will operate as
needed to reach
the selected
temperature.
1. From the home screen,
activate the fan setting
menu by pressing
and then .
2. Press or to choose
the desired fan setting.
3. When the symbol for the
desired setting appears,
confirm your choice by
• Pressing (the
home screen will
appear), or
• Pressing or
(the next menu
will appear), or
• Waiting five seconds.
Indicates that the
fan setting is On.
The number of
arrows indicates
fan speed
(3: high, 2:
medium, 1: low).
The example
shown indicates a
fan on high speed.
Not all systems
offer all three
speeds.
Indicates that the
fan setting is Off.
Select to
request
occupancy
• If you need heating or cooling after
normal business hours, you can
“request” temporary occupancy by
pressing and holding it for
2 seconds. The occupied symbol
remains on the screen and the
unoccupied symbol disappears.
After 30 seconds, the unoccupied
symbol will re-appear.
• To cancel temporary occupancy,
press and hold for 2 seconds. The
unoccupied symbol will remain on
the screen and the occupied symbol
will disappear. After 30 seconds, the
occupied symbol will re-appear.
Select to
cancel
occupancy
Indicates an
error code
If an error code (E0–E7) is displayed,
technical assistance may be required.
Indicates
that a
setting is
locked
The lock symbol appears if you try to
adjust a setting that cannot be
changed.
UNT-SVX07_-EN.book Page 84 Friday, April 27, 2012 9:40 AM