Installation and Maintenance Manual

Installation—Controls
48 UNT-SVX07D-EN
7. To replace the cover:
a. Hook the cover over the top of the back plate. Apply
light pressure to the bottom of the cover until it
snaps in place.
b. Install the security screw into the bottom of the
cover (if desired).
If installing a Tracer ZN510 or Tracer ZN520 zone sensor,
see “Tracer ZN510, ZN520, and UC400 Options,” p. 45 for
more information.
Figure 17.
Figure 18.
Security
screw
UNT-SVX07_-EN.book Page 48 Friday, April 27, 2012 9:40 AM