Installation and Maintenance Manual

UNT-SVX07D-EN 45
Installation—Controls
Control sensor options include both unit-mounted
(factory-installed) and wall-mounted sensors. Installation
instructions for the wall-mounted sensors are provided in
this chapter.
General Information
Control Options (Including Factory-
Installed)
Tracer ZN010 Options
Tracer ZN510, ZN520, and UC400 Options
Unit-mounted zone sensor:
Digit 30 = E and Digit 31 = V
Wall-mounted zone sensor:
Digit 30 = E and Digit 31 = W
Split-mounted zone sensor, unit-mounted fan mode
and wall-mounted setpoint dial:
Digit 30 = E and Digit 31 = X
X13790843-01
X13790841-01
X13511529-01 (wall)
X13790849-01 (unit)
Wall-mounted zone sensor:
Digit 30 = F, G, or J and Digit 31 = 1
Wall-mounted zone sensor:
Digit 30 = F, G, or J and Digit 31 = 2
Split-mounted zone sensor, unit-mounted fan mode and
wall-mounted setpoint dial:
Digit 30 = F, G, or J and Digit 31 = Y
Unit-mounted zone sensor:
Digit 30 = F, G, or J and Digit 31 = Z
X13511530-01 (wall)
X13651467-02 (comm)
X13790842-01 (wall)
X13651467-02 (comm)
X13511527-01 (wall)
X13790849-01 (unit)
X13651467-02 (comm)
X13790844-01
UNT-SVX07_-EN.book Page 45 Friday, April 27, 2012 9:40 AM