Catalogue

CAB-PRC001-EN 37
Controls
Zone Sensor Options
Zone sensors are available as either unit, wall, or split-mounted options for design flexibility. Force-
Flo units with the unit-mounted zone sensor option include a thermistor in the unit’s return air path.
Wall-mounted zone sensor options have an internal thermistor. Zone sensors operate on 24 Vac.
Tracer ZN010 Options Tracer UC400, ZN510, and ZN520 Options
Figure 8. Unit-mounted zone sensor: Digit 30 = E and
Digit 31 = V
Figure 9. Wall-mounted zone sensor: Digit 30 = F or G
and Digit 31 = 1
Figure 10. Wall-mounted zone sensor: Digit 30 = E and
Digit 31 = W
Figure 11. Wall-mounted zone sensor: Digit 30 = F or G
and Digit 31 = 2
Figure 12. Split-mounted zone sensor, unit-mounted fan
mode and wall-mounted setpoint dial:
Digit 30 = E and Digit 31 = X
Figure 13. Split-mounted zone sensor, unit-mounted fan
mode and wall-mounted setpoint dial:
Digit 30 = F or G and Digit 31 = Y
Figure 14. Unit-mounted zone sensor: Digit 30 = F or G
and Digit 31 = Z
X13790843-01
X13511530-01 (wall)
X13651467-02 (comm)
X13790841-01
X13790842-01 (wall)
X13651467-02 (comm)
X13511529-01 (wall)
X13790849-01 (unit)
X13511527-01 (wall)
X13790849-01 (unit)
X13651467-02 (comm)
X13790844-01
CAB-PRC001-EN.book Page 37 Tuesday, May 8, 2012 10:11 AM