Manualshelf

Installation Guide

ManualsBrandsTrane ManualsGenerators20,000-Watt 3-Phase LPG/NG Liquid Cooled Whole House Standby Generator with 200 Amp Automatic Transfer Switch
11121314151617181920
Operation
Stop/ Reset
Stop running generator in Auto/Manual mode; Lamp test (press
at least 3 seconds); Reset alarm if alarm occurs; During stopping
process, press this button again to stop generator immediately.
Start Start genset in Manual/Test mode.
Manual Mode
Pressing this key will set the module into Manual mode. Press-
ing and (or ) simultaneously can adjust LCD contrast.
Auto Mode Pressing this key will set the module into AUTO mode.
Set/Conrm
Pressing this key will view set menu; In parameter setting inter-
face, pressing this key will shift cursor or conrm setting value.
Up/Increase
Scrolls the screen up; Shift the cursor up or increase the set
value in parameter setting menu.
Down/Decrease
Scrolls the screen down; Shift the cursor down or decrease the
set value in parameter setting menu.
INDICATOR LIGHTS
Alarm
Gens Normal
Indicator
Stop Indicator Close Gens
Stop
Manual Manual Auto Auto Start Set
Indicator Indicator
18
18-SG02D1-1A-EN