Full Product Manual
34
032-5095-1A-EN
3. Emission control system limited warranty
The U.S. EPA and Chongqing Panda Machinery Co., Ltd. are pleased to explain the emission control system
limited warranty on your 2013 and later model year engine/equipment. Chongqing Panda Machinery Co.,
Ltd. must warrant to the ultimate purchaser and each subsequent purchaser that the new engine, including
all parts of its emission control system, is designed, built, and equipped so it conforms at the time of sale to
the ultimate purchaser with the U.S. EPA regulations for non-road stationary emergency engines, and is free
from defects in materials and workmanship that may keep it from meeting those requirements.
WARRANTY PERIOD
The limited warranty coverage for this product shall be ve years or 1,000 hours subject to provisions set
forth below, starts from the date of ultimate purchase, whichever occurs rst. If any emission-related part on
your product is defective, the part will be repaired or replaced by Chongqing Panda Machinery Co., Ltd.
OWNER’S WARRANTY RESPONSIBILITIES:
The owner will be responsible for the following:
• Installing, operating, commissioning and maintaining the product in accordance with TRANE and
EquipSource LLC published policies and guidelines.
• Notifying EquipSource within 30 days of the discovery of failure.
• Providing evidence for date of purchase.
• Providing sufcient access to and reasonable ability to remove the product from the installation in the event
of a warrantable failure.
In addition, the owner will be responsible for:
• Incremental costs and expenses associated with product removal and reinstallation resulting from
non-standard installations.
• Costs associated with rental of generator sets used to replace the product being repaired.
• Costs associated with labor overtime and premium shipping requested by the owner.
• Labor and travel after the base warranty period expires.
• All downtime expenses, nes, all applicable taxes, and other losses resulting from a warrantable failure.
If you have any questions regarding your warranty rights and responsibilities, you should contact a
service representative at EquipSource, LLC at 866-471-7464 2205 Industrial Park Road Van Buren, Arkansas
72956
EquipSource LLC, RESPONSIBILITIES:
In the event of a failure of the product during the limited warranty period due to defects in material or
workmanship, EquipSource LLC d/b/a Lifan Power USA will only be responsible for the following costs:
• All parts and labor required to repair the product.
• Reasonable travel expenses to and from the product site location.
LIMITATIONS:
This limited warranty does not cover product failures resulting from:
• Inappropriate use relative to designated power rating.
• Inappropriate use relative to application guidelines.
• Non-conformance to applicable industry standards for installation
• Normal wear and tear.