Full Product Manual
Chapter 4: Maintenance of Generator
Regular maintenance is an important part of your investment and provides longevity of the complete genera-
tor system. Keep it in good working condition according to the specications outlined and it will provide many
years of dependable service.
The following generator maintenance specications are based on a good working environment. If working con-
ditions are less than desirable (such as excessive dust, dirt and humidity, etc.) the maintenance interval periods
should be shortened.
When maintaining the generator set, you should operate in strict accordance with the following requirements.
Improper use and operation can cause premature failure.
Breaking-in period of New Engine
The life of the engine is greatly determined by the state of the rst cycle of use. It is recommended that the
oil be replaced after only 30 hours of use on the rst cycle. The new engine should be operated as required.
Abnormal engine wear will directly affect the life of generator engine.
Maintenance of the Fuel System
The genset is multi-fuel and comes preset from the factory to ether Natural Gas (NG) or Liquid Propane (LPG),
Maintenance will vary according to the fuel used.
Fuel is ammable and an explosive material. Smoking is prohibited while
working or servicing generator.
When using Natural Gas (NG) or Liquid Propane (LPG)
• Before each operation, you should check all components for loose connections. Check for uid leaks
around cylinders, pipes and hoses. Tighten as needed.
• Periodically check the gas pressure reducer and the solenoid valve sealing pad for deformities.
• Periodically check the low-pressure gas line to see if it has weathered or aged (soapy water can be used to
detect leaks).
• When maintenance of the gas line is required, gas valve must be closed before any maintenance or repairs
are carried out.
21
032-5095-1A-EN