Installation and Maintenance Manual

Controls
RTAE-SVX001B-EN 47
regardless of type, machine or circuit.The scrollable list
will be sorted by time of occurrence.
If a informational warning is present, the “Alarms” key will
be present but not flashing. If a Alarm shutdown (normal
or immediate) has occurred, the “Alarm” key will display
that is flashing. If no Alarms exist, the “Alarm” key will not
be present.
Reports
You can use theTracer display to view a variety of reports
and to create and edit a custom report. All reports contain
live data that refreshes every 2–5 seconds.
Viewing the Reports Screen
Touch the Reports button in the main menu area (Figure 4)
to view the Reports screen. The Reports screen contains
the following buttons:
• Custom Report1
• Custom Report2
• Custom Report3
• Evaporator
• Condenser
• Compressor
• Motor
• About
• Operating Modes
• Log Sheet
• ASHRAE Chiller Log
Each button links to the report named on the button.
The
Reports tab allows a user to select from a list of reports
headings. Each report will generate a list of status items as
defined in the tables that follow.
Editing a Custom Report
You can edit the custom report by adding, removing, or re-
order data as follows:
1. On the Custom Report screen, touch Edit.The Edit
Custom Report screen appears.
2. Add, remove, or re-order as follows:
a. To add an item to the custom report, touch it. It
responds
by changing to blue.You can use the
arrows to scroll through the rest of the items that
can be added to the custom report.Then touch Add
to move the selected item to the box on the right
side of the screen.To add all of the remaining items
in the left box to the custom report, touch Add All.
b. To remove an item from the custom report, touch it.
It responds by changing to blue.You can use the
arrows to scroll through the rest of the items that
can be removed from the custom report.Then touch
Remove to move the selected item to the box on the
left side of the screen.
c. To re-order items in the custom report, touch it. It
responds by changing to blue. Use the arrows to
change the order of a highlighted item.
3. To save and view your edited custom report, touch
S
ave.
Figure 33. Report screen
Figure 34. Edit custom report screen
Figure 35. Report evaporator screen