Installation and Maintenance Manual

Installation Mechanical
RTAE-SVX001B-EN 19
Table 8. Lifting locations (from control panel end of frame)
Location
12345678
Tons in mm in mm in mm in mm in mm in mm in mm in mm
Standard Length Unit
150S 45.5 1156 45.5 1156 153.9 3909 153.9 3909 --------
165S 23.5 596 23.5 596 189.7 4818 189.7 4818 --------
150 39.6 1006 39.6 1006 171.4 4353 171.4 4353 --------
165 60.4 1534 60.4 1534 224.6 5705 224.6 5705 --------
180 60.4 1534 60.4 1534 224.6 5705 224.6 5705 --------
200 53.3 1355 53.3 1355 258.7 6570 258.7 6570 --------
225 53.3 1355 53.3 1355 258.7 6570 258.7 6570 --------
250 53.3 1355 53.3 1355 258.7 6570 258.7 6570 --------
275 75.8 1926 75.8 1926 190.7 4845 190.7 4845 311.9 7922 311.9 7922 - - - -
300 47.6 1210 47.6 1210 171.3 4350 171.3 4350 242.8 6168 242.8 6168 365.1 9274 365.1 9274
Extended Length Unit
(a)
150S 23.5 596 23.5 596 207.1 5261 207.1 5261 --------
165S 23.5 596 23.5 596 242.9 6170 242.9 6170 --------
150 44.7 1136 44.7 1136 224.6 5705 224.6 5705 --------
165 61.1 1552 61.1 1552 171.3 4350 171.3 4350 277.8 7057 277.8 7057 - - - -
180 61.1 1552 61.1 1552 171.3 4350 171.3 4350 277.8 7057 277.8 7057 - - - -
200 47.6 1210 47.6 1210 190.7 4845 190.7 4845 311.9 7922 311.9 7922 - - - -
225 47.6 1210 47.6 1210 190.7 4845 190.7 4845 311.9 7922 311.9 7922 - - - -
250 47.6 1210 47.6 1210 190.7 4845 190.7 4845 311.9 7922 311.9 7922 - - - -
275 75.8 1926 75.8 1926 182.0 4623 182.0 4623 258.5 6565 258.5 6565 365.1 9274 365.1 9274
300 47.6 1210 47.6 1210 168.5 4280 168.5 4280 296.1 7520 296.1 7520 418.3 10626 418.3 10626
(a) Units are extended length if either of the following are selected:
Low Harmonic Distortion Option (model number digit 29 = 1)
Autotransformer (model number digit 28 = 1 or 2)
Units without Low Harmonic Distortion Option or Autotransformer (digits 28, 29 = X0) are standard length.