Catalogue

RLC-PRC042D-EN 39
Dimensions and Weights
Service Clearance
Figure 13. RTAE service clearances
NOTES:
1. A full 40” clearance
is required in front
of the control panel.
Must be measured
from front of panel,
not end of unit base.
2. Clearance of 85”
on the side of the
unit is required for
coil replacement.
Preferred side for
coil replacement is
shown (left side of
unit, as facing control
panel), however either
side is acceptable.
36” (914.4mm)
40”
(1016
mm)
24”
(600.1mm)
Control
Panel
NO OBSTRUCTIONS ABOVE UNIT
TOP VIEW
See
note 1
85” (2160mm)
See note 2