Programming Guide

82 VAV-SVP01A-EN
Air and Water Balancing
Technician
Type the name of the technician performing the air and water balancing.
Date
The default value is the date on which the job was created in the Air and Water Balancing tool. You
can change this to a different date.
Select Job Units
Click Inch-Pound to use cubic feet per minute (cfm) to measure airflow. Click International System
to use SI units, such as liters per second (L/s) to measure airflow. The units you select are used only
for reporting purposes in the Air and Water Balancing tool-they do not affect the units used in the
controller or in Rover Comm5.
Change Airflow Units button
This button appears only if you select to use SI units. Click this button to select one of the following
SI units of measurement:
• Liters per second (L/s)
• Cubic meters per second (m
3
/s)
• Cubic meters per minute (m
3
/min.)
Airflow Units
The selected SI units of measurement for airflow. This field appears only when SI units are selected.
Save button
Click this button to save any changes you have made to the job information.
Create Report button
Click this button to create a balancing report.
Open Another Job button
Click this button to open another job.
Exit button
Click this button to close the Air and Water Balancing tool.