Installation and Maintenance Manual

Controls Interface
162 RLC-SVX09H-EN
Software View
Software view allows you to verify the version of chiller
software currently running on the DynaView and
download a new version of chiller software to the
DynaView.
You can also add up to two available languages to load into
the DynaView. Loading an alternate language file allows
the DynaView to display its text in the selected alternate
language, English will always be available.
Binding View
Binding View allows you to assess the status of the
network and all the devices connected as a whole, or the
status of individual devices by using status icons and
function buttons.
Binding View is essentially a table depicting what devices
and options are actually discovered on the network bus
(and their communication status) versus what is required
to support the configuration defined by the feature codes
and categories. Binding View allows you to add, remove,
modify, verify, and reassign devices and options in order
to match the configuration requirements.Whenever a
device is installed, it must be correctly configured to
communicate and to function as intended.This process is
called binding. Some features of Binding View are
intended to serve a second purpose; that is diagnosing
problems with communication among the devices
Figure 64. Configuration view - options tab
Figure 65. Software view