Manualshelf

Catalogue

ManualsBrandsTrane ManualschillerTrane Series R Model RTUD
81828384858687888990
86 RLC-PRC029-EN
Electrical Data
Table 46. Electrical Data – RTWD – 50 Hz – premium efficiency – standard condensing temperature
Unit Wiring Motor Data
Unit ID Rated Voltage
# Power
Conns
MCA
Ckt 1/Ckt 2
MOP
Ckt 1/Ckt 2
RLA
Ckt 1/Ckt 2
LRA YD
Ckt 1/Ckt 2
LRA XL
Ckt 1/Ckt 2
RTWD 160
400/50/3 1 221 300
97/97 259/259 796/796
400/50/3 2 124/122 200/200
RTWD 180
400/50/3 1 246 350
97/117 259/291 796/896
400/50/3 2 124/147 200/250
RTWD 200
400/50/3 1 266 350
117/117 291/291 896/896
400/50/3 2 149/147 250/250
1. MCA–minimum circuit ampacity
2. MOP–maximum overcurrent protection
3. RLA–rated load amps are rated in accordance with UL Standard 1995.
4. LRA–locked rotor amps are based on full winding starts.
5. LRA YD–Locked Rotor Amps in Wye configuration. LRA XL–Locked Rotor Amps in the Delta configuration.
6. Local codes may take precedence.
7. Data containing information on two circuits shown as follows: circuit 1/circuit 2.
8. Standard condensing temperature option refers to entering condenser water temperatures 95°F (35°C) and below.
Table 47. Electrical Data – RTWD – 50 Hz – premium efficiency – high condensing temperature
Unit Wiring Motor Data
Unit ID Rated Voltage
# Power
Conns
MCA
Ckt 1/Ckt 2
MOP
Ckt 1/Ckt 2
RLA
Ckt 1/Ckt 2
LRA YD
Ckt 1/Ckt 2
LRA XL
Ckt 1/Ckt 2
RTWD 160
400/50/3 1 268 350
118/118 259/259 796/796
400/50/3 2 150/148 250/250
RTWD 180
400/50/3 1 297 400
118/141 259/291 796/896
400/50/3 2 150/177 250/300
RTWD 200
400/50/3 1 320 450
141/141 291/291 896/896
400/50/3 2 179/177 300/300
1. MCA–minimum circuit ampacity
2. MOP–maximum overcurrent protection
3. RLA–rated load amps are rated in accordance with UL Standard 1995.
4. LRA–locked rotor amps are based on full winding starts.
5. LRA YD–Locked Rotor Amps in Wye configuration. LRA XL–Locked Rotor Amps in the Delta configuration.
6. Local codes may take precedence.
7. Data containing information on two circuits shown as follows: circuit 1/circuit 2.
8. High condensing temperature option refers to entering condenser water temperatures above 95°F (35°C).